International 966 Operators Manual Tractor 1084205R1

$14.95

Factory Operators Manual For International Tractor. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: English
Pages: 120
Number: 1084205R1

Model

International Tractor
966

Contents

SERIAL NUMBERS
CONTENTS
INTRODUCTION
-WORK SAFELY – FOLLOW THESE RULES
Before Starting
During Operation
Tractors with Cabs
Transporting
After Operations
INSTRUMENTS AND CONTROLS
-BEFORE OPERATING YOUR NEW TRACTOR
Tractor Break-in Procedure
Lubrication
Tires
Air Cleaning System
Engine Cooling System
Fuel System
-DRIVING THE TRACTOR
Preparing the Tractor for Each Day’s Work
Fuel Gauge
Filling t he Fuel Tank
Adjusting the Seat
Steering the Tractor
Tilt Steering Wheel (Optional)
Locking the Brakes
Accelerator Pedal (Optional)
Differential Lock (Optional)
Operating the Cab Control
Starting Switch (Gear Drive)
Transmission Range and Speed Levers (Gear Drive)
Starting the Tractor (Gear Drive)
Hydraulic Powered Clutch Control (Optional) (Gear Drive)
All-Wheel Drive (Optional)
Torque Amplifier (Optional)
Stopping the Tractor (Gear Drive)
Park Lock Lever (Gear Drive)
Towing the Tractor (Gear Drive)
Speedometer – Tachometer (Gear Drive)
Starting Switch (Hydrostatic Drive)
Speed Ratio Control (Hydrostatic Drive)
Hi-Lo Range Selector Control (Hydrostatic Drive)
Foot-N-lnch Pedal (Hydrostatic Drive)
Starting the Tractor (Hydrostatic Drive)
Starting Procedure for Hydrostatic Drive Tractors After
Transporting on Truck or Flatcar
Transmission Oil Heater (Optional) (Hydrostatic Drive)
All-Wheel Drive (Optional) (Hydrostatic Drive)
Stopping the Tractor (Hydrostatic Drive)
Park Lock Lever (Hydrostatic Drive)
Towing the Tractor (Hydrostatic Drive)
Speedometer — Tachometer (Hydrostatic Drive)
-ENGINE AND FUEL SYSTEM
Fuel System
Warranty Notice
Venting the Fuel System
Fuel Storage
Starting the Engine
After the Engine is Running
Engine Oil Pressure
Stopping the Engine
Changing the Ether Fluid Container
Draining Water from the Tractor
Fuel Tanks
Fuel Filters
Fuel Injection Pump and Nozzles
Injection Pump Governor
Engine Coolant Heater (Optional)
-HYDRAULIC CONTROLS FOR THE THREE-POINT HITCH
Position Control (Inside Lever)
Draft Control (Outside Lever)
Run Range (Inside Lever)
-THREE-POINT HITCH
Lift Links and Leveling Cranks
Rigid Hitch Position
Free to Float Position
Hitch Lower Links
Hitch Upper Link
Lateral Limiter
Lateral Limiter Adjustment Procedure
Coupling the Equipment
Example of Operating the Three-Point Hitch with Draft Control
Uncoupling the Equipment
Removing the Three-Point Hitch Linkage
Installing the Three-Point Hitch Linkage
-WEIGHT TRANSFER HITCH
Operation
-TWO-POINT HITCH
Lift Links and Leveling Cranks
Hitch Sockets
Rigid Hitch Position
Free to Float Position
Coupling the Equipment
Uncoupling the Equipment
Removing the Two-Point Hitch Linkage
Installing the Two-Point Hitch
Linkage
-HITCHING TRAILING EQUIPMENT TO THE TRACTOR
Swinging Drawbar
Cross Drawbar (Two-Point Hitch)
-AUXILIARY VALVES, REMOTE CYLINDERS AND HYDRAULIC OUTLETS
Connecting Hoses to Rear Hydraulic Outlets
Connecting Hoses to Front Hydraulic Outlets
Thermal Expansion Pressures
Operating the Double-Acting Cylinders
Operating the Single-Acting Cylinders
Float Lockout
Adding Fluid After Connecting Cylinders and Hoses
Freeing the System of Trapped Air
Simultaneous Raise
-POWER TAKE-OFF
Operating the Independent Power Take-off
-COOLING SYSTEM
Temperature Gauge
Filling the Cooling System
Adding Coolant to the Cooling System
Cleaning the Cooling System
Radiator Core and Transmission Oil Cooler
Water Pump, Alternator-Generator,and Fan Belt Tension
-AIR CLEANING SYSTEM
Dry-Type Air Cleaner
Air Cleaner Service Indicator
Removing and Cleaning the Large
Filter Element
Safety Element
Automatic Dust Unloader
-ELECTRICAL SYSTEM
Charging System for Alternator-Generator
Cranking System
Lighting System
Warning Lights
Transmission Oil Pressure Tellite (Gear Drive)
Transmission Warning Tellite (Hydrostatic Drive)
Lighting Switch Positions
Fuse
Battery
-FRONT WHEELS
Adjustable Wide-Tread Front Axle
Farmall Hi-Clear Adjustable Front Axle
All-Wheel Drive Front Axle
Tricycle Front Axle
Adjusting Wide-Tread Front Axle and Farmall Hi-Clear Adjustable
Front Axle for Tread Widths
Adjusting the Toe-In
-REAR WHEELS
Adjusting the Tread Width
Assembling the Rear Wheels Double- Bead Rims
Reversing the Rear Wheels
Wheels with Double-Beaded Rims
Tractors with Wedge Wheels
Dual Rear Wheels
-WEIGHTS
Front End Weights
Front End Weight Hold-Down and Locking Device
Rear Wheel Weights (Two-Piece)
All-Wheel Drive Tractors
-TIRES
Inflation
Front Tire Inflation Pressure
Rear Tire Inflation Pressure
-STORING THE TRACTOR
Storage
Removing from Storage
-COLD WEATHER PRECAUTIONS
Fuel System
Electrical
Lubrication
Cooling System
-LUBRICATION
Oil Level
Oil Pump
Engine Oil Cooler
Engine Oil
To Aid Starting
Gear Lubricant
Lubrication Fitting Grease
Engine Oil Filter
Changing the Oil Filters
Hydraulic Fluid Filter
Lubricating the Front Wheels
LUBRICATION TABLE
LUBRICATION GUIDE
PREVENTIVE MAINTENANCE GUIDE
-CAB EQUIPMENT PREVENTIVE MAINTENANCE
Pressurized Filter
Re-circulation Air Filter
Air Conditioner Condenser
Refrigerant Sight Glass
Adjusting the Compressor Belt Tension
Compressor Pulley and Clutch
Compressor Oil Level
Coolant Shut-off
Fuel Shut-off
Electrical
Miscellaneous
Door Adjustment
SPECIFICATIONS
OPTIONAL EQUIPMENT