Tigercat 1185 Operators Manual Harvester 51800AENG

$19.96

Factory Operators Manual For Tigercat Harvester. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Photo 7 - Tigercat 1185 Operators Manual Harvester 51800AENG
Tigercat 1185 Operators Manual Harvester 51800AENG $19.96
  • Unlimited Lifetime Access
  • Instant Download
  • Ready for Print
Guaranteed Safe Checkout

payment methods

Factory Operators Manual For Tigercat Harvester. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: English
Pages: 486
Number: 51800AENG (august 2017)
Bookmarks
Searchable

Model

Tigercat Harvester
1185
Serial Numbers 11850101 To 11850500

Contents

INTRODUCTION
MACHINE IDENTIFICATION AND SERIAL NUMBERS
SAE STANDARDS FOR MACHINE OPERATOR PROTECTIVE STRUCTURES
NON-APPROVED FIELD PRODUCT CHANGES
REGULATORY INFORMATION
WARRANTY-EPA
-SAFETY
Attachment Safety
Battery
Cab Exits
Calibration
Chain Shot
Clean And Inspect
Competent Person
Compliance With Instructions and Required Record Keeping
Diesel Exhaust Fluid (DEF)
Diesel Fuel
Dry Chemical Cleanup
Electrical
Electrical Hazards
Environmental Hazards
ER Boom System
Fastener Torque And Reuse
Fighting Fires
Fire Prevention
Fluid Hazards
Grease Injection Injury When Using Pneumatic Grease Guns
Harvesting Attachment
Hazardous Materials
Hazards
High Pressure Injection Injuries
Hydraulic Hazards
Interlock Door Switch
Lifting And Carrying
Lifting Components Safely
Lightening Safety Awareness
Lock Out/Tag Out
Logging Safety
Loose Clothing Hazard
Machine Fire
Machine Hazards
Machine Stability And Traction
Maintenance
Material Lifting And Handling
Notice Labels
Operating Hazards
Operational Recommendations
Pneumatic Grease Guns
Read This Manual First
Refuelling The Machine
Retained Hydraulic Pressure
Safety Labels
Safety Precautions, General
Safety Symbols
Service Safety Precautions
Shipping Components
Signal Words
Thread Locking /Adhesive Compounds And Sealants
Transporting The Machine
Tree Felling Operations
Welding, Prior To
What To Do After A Machine Fire Has Occurred
What To Do If You Are Outside And See Lightening Or Hear Thunder
Work Conditions And Tools
Working With Oil
-CONTROLS AND OPERATION
Activity Log Screen
Adjusting The Start/Stop Values
Adjustments
Adjust Menu Screen
Adjust Rights Screen
Aftertreatment System – Engine Idle Too Long Alarm
Aftertreatment System
Technical Failure
Aftertreatment System Technical Failure Severe Alarm
Air Conditioning Control
Air Recirculation Filters
Alarm Messages – Types
Alarms
All Wheel Drive Switch
Attachment Rotate CW/CCW
Attachment Rotate Screen
Audio System
Auto Leveling
Auxiliary Power Outlets
Backlight
Band Width Limiting Adjustments – About
Battery Disconnect Switch
Bogie Balance Adjustment
Braking
Cab Air Conditioning, Heating And Ventilation
Cab Air Filters And Vents
Cable Assist
Camera And Display
Computer
Computer Display
Computer Display Messages
Control Panel
Coolant
Coolant Level Sensor Error Alarm
Cooling Fan Adjustments
Cooling Fan Clean Switch
Cooling Fan Full On/Automatic
Crane
Current Output Error
Date/Time Adjustments Screen
DEF Level Low
DEF Quality Messages
Diesel Exhaust Fluid
Differential Lock Engaged Alarm
Differential Locks Engaged Alarm
Digital Output Error
Display Adjustments Screen
Door Safety Interlock
Drive
Drive Charge Filter Bypassed Alarm
Drive Charge System Alarm
Drive Motor Speed Sensor Alarm
Drives Adjustments Screen
Drive Speed Sensor Off Alarm
Electronic Device Holder
Emergency
Emergency Engine Stop Button
Emergency Shut-Off Switch
Emergency Shut Off Switch Location
Engine
Engine Torque Derate Active
Entering And Exiting The Cab
ER Boom System, Instructions
Fan Full On Alarm
Fine Control
Fine Control-About
Fire
Fire Suppression
Fire Suppression Discharged Alarm
Fire Suppression Fault Alarm
Fire Suppression System – Amerex
Fire Suppression System – Fogmaker
Fire Suppression System – Fogmaker
Fresh Air Filter
Front Differential Lock Switch
Fuel Low Level Alarm
Gear Selection Switch
General Crane Adjustments
General Machine Adjustments
Harvesting Head
Heater
Holding Brakes
Horn/Safety Alert Switch
Hot Engine Shutdown
Hot Engine Shutdown Prevention
Hot Engine Shutdown Prevention Strategy
HVAC
Hydraulic Motor Speed High Alarm
Hydraulic Oil
Idling The Machine
Ignition Key Switch
Information
Interior Cab Light Switch
Interlock Reset Switch
Interlock System
IQAN Module Fault Alarm
Joystick
Ladder And Platform Raise/Lower Switch
Language Adjustment
Left Joystick
Leveling
Leveling Adjustment Screen
Load Sensing, Operating Tips
Logging Out Of The Computer
Machine Orientation Screen
Machine Start-Up
Machine Test And Warm-up
Machine Voltage High Alarm
Machine Voltage Low Alarm
Main Boom Adjustments Screen
Main Boom Up/Down
Main Fuel Filter Clogged Alarm
Main Menu-About
Main Menu Screen
Manual Leveling
Maximum
Measure Menu Screen
Methods Used To Make Adjustments
Min/Max Current Values
Min, Max, Slopes
Min/Max Values, Adjusting
Module No Contact Error Alarm
Modules Screen
Module VREF Error Alarm
Oil Grade Adjustments Screen
Oil Grade Selection
Operating The Machine
Operator Adjustments Screen
Operator’s Manual Case
Operator’s Seat
Oscillation Balance Screen
Oscillation Balance Switch
Overhead Control Panels
Parking Brake Switch
Passwords
Pedal Controls
Pictograms
Portable Fire Extinguishers
Preferences Screen
Pre-Start Checks
Programmable Foot Pedal
Programmed Selector Switches
Pump Drive Gearbox Oil Temperature High Alarm
Raw VS Scaled Values
Rear Differential Lock Switch
Restarting An Engine
Return Filter Bypassed Alarm
Right Joystick
Right Joystick Pod
Rotate (Attachment)
Scaled VS Raw Values
Seat
Service Brake Pressure Low Alarm
Starting The Engine
Start/Stop Slopes
Start/Stop Values
Steer Angle Sensor
Steering
Stick Boom Adjustments Screen
Stopping The Engine
Storage Compartments
Switch
System Menu Screen
Telescope Adjustments
Telescope Adjustments Screen
Telescoping Boom Extend/Retract
Temperate Engine Shutdown
Temperature Control
Travel Direction Swap Pedal
Travel Direction Switch
Travel/Engine Speed Adjust Switch
Turn Signal
Unlock Adjust Screen
USB Ports
Vents
Voltage Input Error Alarm
Warmup Mode
Water In Fuel Alarm
Webasto Fault Alarm
Windshield
Worklights
-LUBRICATION AND MAINTENANCE
Access A/C Components
Accumulator
Add Oil
Add Oil To The Hydraulic Oil Tank
Aftertreatment System
Air Conditioning System
Air Intake System
Approved Anti-Seize Pastes For Exhaust/Aftertreatment Line (Tigercat By FPT Tier 4F Engines)
Approved Hydraulic Oils
Articulation Bearing
Articulation Lock Installation
Axle
Axle Input Shaft Lubrication
Battery
Bogie Axles
Boom Guides
Boost The Battery
Windshield Washer Fluid Reservoif
Brakes
Cab
Care Of The Machine
Case Return Strainer
Centre Joint
Change The Engine Fuel Filter
Change The Fuel Filter/Water Separator Element
Charge The Batteries
Check Telescopic Stick Boom Play
Check The Hydraulic Oil Level
Clean
Common And Custom Torque Specifications
Compartment, Storage
Compressor Belt Tension
Condenser, A/C, Cleaning
Coolant Heater See Engine Coolant Heater
Coolant Shut-Off Valve
Cooler Package
Crane Lubrication
Crankcase Ventilation Filter
Cylinder Locks
DEF
Diesel Exhaust Fluid (DEF)
Disable The Oscillation Lock Cylinders
Disconnect The Transmission
Drain
Drain The Oil
Emergency Exit
Engine
Engine Coolant Heater Unit
Engine Coolant Heater Unit Preventative Maintenance
Filter Restriction Indicator
Filters
Fire
Fluid Analysis Program
Flywheel Housing
Fuel System
Fuses
Fuses And Relays
General Safety Information
Hydraulic Oil
Hydraulic Oil Tank
Input Shaft Lubrication
Install And Uninstall The Ladder
Jump Start The Batteries
Ladder
Leveling Cylinders
Lock
Lockout Reset Procedure
Low Voltage Disconnect Adjustment
Lubrication
Machine Weight
Maintenance, Preventative
Manual Hand Pump – Engine Enclosure And Fuel Tank
New Machine Maintenance
Oil
Oscillation
Oscillation Joint
Portable Ladder
Pressure And Speed Settings
Pressure Washing The Machine
Preventive Maintenance
Pump Drive Gearbox
Radiator
Receiver/Drier
Refuel
Release
Remote Fuel Tank Filling
Return Strainer
Rotary Manifold Bottle
Rotary Manifold Reservoir
Rotary Manifold Seal Lubrication
Scheduled Maintenance
Serpentine Belt
Service And Lubrication Schedule
Service Lights
Slew Bearing Lubrication
Steer Cylinder Lubrication
Storage Compartment
Swing Drive Gearbox
Taper Lock Pins Re-Torquing
Telescopic Stick Boom
Tilt
Tire Pressures
Torque Chart, General
Torque, Fluid Connections
Torque Values
Tow The Machine
Transmission
Transport The Machine
Unloader Valve
Vacuum Pump
Weight
Weights Of Commercial Wood
Windshield Washer Fluid Bottle
Work Light Fuses
-TIGERCAT 1100 SERIES MOVING AND TRANSPORTING INSTRUCTIONS HARVESTER 52024AMUL
Machine Overview
Preparation
Operating The Machine
Operating The Boom
Boom Positions
Driving Position
Driving The Machine
Park Position
Transporting

What you get

You will receive PDF file with high-quality manual on your email immediately after the payment.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.