Bomag BW24RH BW27RH Operating Maintenance Instructions Rubber Tire Roller 00812631

Factory Operating Maintenance Instructions For Bomag Rubber Tire Roller. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: ENG
Pages: 110
Number: 00812631 (december 2006)
Bookmarks: Yes
Searchable: Yes

Model

Bomag Rubber Tire Roller
BW24RH
BW27RH

Contents

TECHNICAL DATA
SAFETY REGULATIONS
-INDICATORS AND CONTROLS
General Notes
Description Of Indicators And Control Elements
-OPERATION
General Notes
Tests Before Taking Into Operation
Disarming The Anti-Theft Protection
Starting The Engine
Starting With Jump Wires
Driving The Machine / Braking
Operating The Parking Brake
Shutting The Engine Down, Parking The Machine
In Events Of Emergency
Operating The Pressure Sprinkler System
Operating The Lire Inflation System
Adjusting The Driver’s Seat
Operating The Hood
Ballasting Of Machine
Towing In Case Of An Engine Failure
Transport
-MAINTENANCE
General Notes On Maintenance
Fuels And Lubricants
Table Of Fuels And Lubricants
Running-In Instructions
Maintenance Chart
Check The Engine Oil Level
Check, Clean The Water Separator
Check The Coolant Level
Check The Hydraulic Oil Level
Draining The Air Pressure Vessel
Checking/Filling Up The Water Provision In The Sprinkler System
Checking/Adjusting The Scrapers
Check The Fuel Level
Multi-Disc Brake, Function Test
Clean The Cooling Fins On Engine And Hydraulic Oil Cooler
Check The Oil Level In The Drive Gear/Wheel Hub
Changing Engine Oil And Oil Filter Cartridges
Change The Fuel Filter Cartridge
Drain The Sludge From The Fuel Tank
Battery Maintenance
Change The Fuel Pre-Filter Cartridge
Checking, Replacing The Refrigerant Compressor V-Belt
Service The Air Conditioning
Checking Hydraulic, Pneumatic Hoses And Electric Cables
Check, Adjust The Valve Clearance
Checking / Replacing The Ribbed V-Belt
Check The Engine Mounts
Tighten The Wheel Nuts
Checking The Roll Over Protective Structure (Rops/Fops)
Changing The Air Drier For The Brake System
Changing The Oil In Travel Gears/Wheel Hubs
Changing Hydraulic Oil And Breather Filter
Changing The Hydraulic Oil Filter
Change The Coolant
Checking The Supply Lines For The Compressor
Checking The Injection Valves
Service The Combustion Air Filter
Sew Icing The Water Sprinkling System
Maintenance In Case Of Frost
Filling The Windscreen Was Her System
Changing The Fresh Air Filter In The Cabin
Change The Tires
Check Bolted Connections For Tight Fit
Temporary Taking Out Of Service
-TROUBLESHOOTING
General Notes
Engine
TIRE COMPACTION VALUES

What you get

You will receive PDF file with high-quality manual on your email immediately after the payment.