Factory Operating Maintenance Instructions For Bomag Cold Planner. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: ENG
Pages: 316
Number: 00820166 (january 2018)
Bookmarks: Yes
Searchable: Yes

Model

Bomag Cold Planer
BM2200-75
S/N 101 888 01 1001 – S/N 101 888 01 1006

Contents

-INTRODUCTION
Foreword
Machine Type Plate And Engine Type Plate
-TECHNICAL DATA
Noise And Vibration Data
-CONCERNING YOUR SAFETY
Basic Prerequisites
Definition Of Responsible Persons
Basic Safety Regulations For Safe Operation
Handling Fuels And Lubricants
Loading / Transporting The Machine
Start Up Procedure
Driving The Machine; Working Operation
Refuelling
Emergency Procedures
Maintenance Work
Repair
Signage
-INDICATORS AND CONTROL ELEMENTS
Driver’s Stand
Machine
-CHECKS PRIOR TO START UP
Notes On Safety
Visual Inspections And Function Tests
Checking The Engine Oil Level
Checking The Fuel Level, Topping Up Fuel
Checking The Hydraulic Oil Level
Checking The Coolant Level
Checking The Water Spraying System
Checking The Wear Items Of The Milling Unit
Checking The Track Pads
Checking Condition And Tension Of Conveyor Belts
Checking Safety Rope And Chain
Lubricating The Machine
Checking The Compressor Oil Level
Checking The Engine Oil Level (Hatz)
-OPERATION
Setting Up The Workplace
Starting The Engine
Steering The Machine
Driving The Machine
Milling Operation
Parking The Machine In Secured Condition
Operating The Scraper
Folding The Conveyor Belt
Operating The High Pressure Cleaner
Operating The Extraction System
Outer Display
Operating The Levelling System
Operating The Camera
Emergency Procedures
-LOADING / TRANSPORTING THE MACHINE
Prepare For Transport
Transporting The Milling Box Separately
Loading The Machine
Lashing The Machine To The Transport Vehicle
Loading By Crane
After Transport
-MAINTENANCE
Preliminary Remarks And Safety Notes
Preparations/Concluding Work
Fuels And Lubricants
List Of Fuels And Lubricants
Running-In Instructions
Maintenance Table
Every 250 Operating Hours
Every 500 Operating Hours
Every 1000 Operating Hours
Every 2000 Operating Hours
As Required
-TROUBLESHOOTING
Preliminary Remarks
Starting The Engine With Jump Leads
Fuse Assignment
Fault Code Display
Measuring Value Display
Engine Faults
Engine Faults (Hatz)
-DISPOSAL
Final Shut-Down Of Machine
LIST OF SPECIAL TOOLS